• Colors
• Design Galleries
• Edges

Hanex Solid Surface is the ideal surfacing material for both residential and commercial applications because of its beauty, durability, and diverse color selection. Hanex Solid Surface is crafted from a unique blend of acrylic resins and natural materials, allowing the material to be cut, shaped and formed to fit a wide range of designs. Best of all, Hanex Solid Surfaces can be used in many applications where sanitation is of utmost importance, such as retail kitchens, hospitals, laboratories, playrooms, schools, public restrooms and workspaces. Hanex Solid Surfaces combine beauty, design, and practicality into a look that is uniquely yours.

Tour the solid surface fabrication division of Tower Industries in Massillon, Ohio. Tower Industries offers extensive custom capabilities and high-volume solid surface fabrication services from its 55,000 square foot manufacturing facility centrally-located in the Midwest. They also manufacture a large variety of standard and custom solid surface shower components from Tower’s own Meridian Solid Surface for countless commercial and institutional applications throughout the United States.

The Hanex Solid Surface Advantage – Superior Function and Form

Features and Benfits

• Available in 78 rich colors and textures
• Easy to fabricate and install with inconspicuous seams
• Scratch and stain resistant – easily maintained
• Highly durable - stronger than stone
• Resistant to heat, mold, chemicals, pollutants and bacteria
• Environmentally friendly – renewable and repairable
• Safe – tested and certified by the National Sanitation for Food Safety and Food Contact under the NSF 51 Certification
• Backed by a Residential Lifetime Limited Warranty
• GREENGUARD Indoor Air Quality Certified®
• GREENGUARD for Children & Schools

Characteristics

Hanex Solid Surfaces are easy to work with and can be fabricated using standard woodworking tools. The wide variety of colors and patterns provide the characteristics that make it the perfect choice for your project: an attractive, affordable, contemporary surface that can stand up to heavy traffic and day-to-day use.

• 
  Commercial Photos
• 
  Residential Photos

Everyday cleaning

• Wipe clean with a damp cloth or sponge soaked in water
• Basic stains: Clean with mild detergents or general all purpose cleaners
• Periodically go over entire surface with a mild abrasive cleanser or a wet blue Scotch Brite™ pad to maintain a uniform appearance.

Heat Damage

Hanex Solid Surfaces are inherently heat resistant. However, to prevent any heat damage, you should never place hot items directly on Hanex Solid Surfaces. Always use trivets with rubber feet when placing hot items on the countertop. Remember, placing hot pans or heat-generating appliances directly on Hanex Solid Surfaces may cause damages to your countertop. Avoid direct and indirect heat reaching temperatures of 80°C (170°F) or above.

Chemical Damage

Avoid strong chemicals that can cause damages to your surface such as oven cleaners, acetone, paint removers, and other strong chemicals. If exposed, promptly flush with water. Remember, prolonged contact with harsh chemicals can cause serious damage to your countertop.

Precautionary Steps

• Avoid cutting directly on Hanex Solid Surfaces. Always use a cutting board.
• Never place hot pans directly on the countertop. Even though Hanex Solid Surfaces is heat-resistant, it is not heat-proof. Prolonged periods of extreme heat may cause permanent damage.
• Strong acids, such as those found in drain cleaners, should be flushed with water immediately. Some of these items may cause whitening if left on the surface, which can be difficult to remove.

Damage Repair

• To remove persistent stains, cigarette burns or scratches: Scrub the stained area with a mild abrasive cleanser using blue Scotch Brite™ pad.
• Deep scratches can be eliminated in matte-finish products by carefully sanding the damaged area with a 120-grit sandpaper, followed by a 220-grit, then a 320-grit sandpaper. Finish by lightly rubbing the surface with a wet, blue Scotch Brite™ pad in a circular motion to restore the finish. Note: different methods can be used depending on the finish.

Residential Lifetime Limited Warranty for North America

Hanwha L&C Corporation (hereunder “Hanwha”) warrants to the original purchaser/owner in the U.S. and Canada that its product Hanex Solid Surfaces, shall be free from manufacturing defects in material under normal use and service. Hanwha, at its discretion, will repair or replace product failures only due to manufacturing defects. This Lifetime Limited Warranty is available only to the original owner(s) of the Residence in which Hanex Solid Surfaces has been originally installed. The Lifetime Limited Warranty is Non Transferrable and applies to Hanex Solid Surfaces product only, for interior, residential application(s) in North America. This warranty is void unless the product has been paid for in full, and the product must be registered on or before 30 days of installation.

Under this Lifetime Limited Warranty, Hanwha’s authorized agents must be permitted sufficient time and opportunity to inspect the Product(s), evaluate and respond to any claim.

All decisions regarding the existence of manufacturing defects or affecting this Warranty shall be made by Hanwha and shall be final and binding upon all parties. The professional fabricator/installer is responsible to inspect the Hanex Solid Surfaces material before fabricating and/or installing the Hanex Solid Surfaces product. It is also the end user’s responsibility to inspect the finished product before permanent installation. This warranty does not cover any defects that were visible at the time of fabrication/installation and were not avoided during fabrication/installation. All parties must agree to comply with the terms and conditions outlined in this Lifetime Limited Warranty.

This Lifetime Limited Warranty applies to product(s) installed after March 01, 2010.

View the full details of warranty

• Solid Surface Dark Color Disclaimer Rev A 12.01.2008