• Colors
• Design Gallery
• Edges
• Helpful hints

The beauty and rich composition of hand-selected natural stone, with varied shades, veining and colorations that give a unique pattern to every project.

Listen to Tower Industries’ President Todd Werstler discuss the capabilities of their high-capacity, state-of-the-art stone fabrication department, in which they create beautiful, durable Granite and Quartz countertops using the latest stone fabrication technology. Tower Industries manufactures Meridian Solid Surface and fabricates a wide variety of premium surfacing materials in their 55,000 square foot manufacturing facility in Massillon, Ohio.

Variation in the natural stone color, pattern, size, shape and shade are inherent and unique characteristics to be expected. This does not affect the product performance. Your countertop will not be replaced due to these variations.

Natural stone products may contain some or all of the following characteristics:

• Areas that have been filled with color-matched epoxy that may compromise the integrity and strength of the materials.
• Variations in veining, color and movement.
• Small visible "fissure" lines on the surface which rarely affect the structural integrity.
• Natural mineral deposits, or "beauty marks," that can be seen as intensified spots or lines of color, lack of color and areas with compromised polishing ability.
• Pitting "pock" marks of varying size on the surface

All natural stone products can be damaged by excessive force, pressure or prolonged heating.

All seams will be plainly visible and where there are seams the product pattern, color and other characteristics may change.

A minimum six-inch splash height is required to cut out for electrical boxes. Electrical boxes in splashes less than six inches will have multiple seams surrounding the box.

Support brackets are required for any natural stone overhang exceeding 5 inches in depth. Brackets are to be supplied by the customer and must be placed no more than 36 inches apart.

Tower Industries does not qualify cutout or template information of any kind. Tower Industries fabricates cutouts per manufacturer or customer-supplied templates or measurements and is NOT responsible for the accuracy of the information provided.

It is the customer's responsibility to ensure that customer-supplied sinks and faucets will fit and operate properly within the allotted countertop depth.

• Care and Cleaning Instructions: Natural Stone Surfacing
• About Your Stone Product, Rev B
• Procedure for Ordering Stone Products
• Stone Pre-template Checklist
• Stone Order Form, Rev B
• Fabricated Stone Order Form, Rev B
• AutoCAD Drawing Requirements
• Fabrication Drawing Requirements
• Stone Fabrication Guidelines